Chlorine-free,microsilica ,silica fume,GGBFS ,GGBS ,Ground Granulated Blast Furnace Slag, no sodium or less sodium and durability of concrete will not have a negative impact on the slag - cinder compound activating agent, thereby achieving the slag mixture in the production of the slow introduction of a certain number of thermal power plant without reducing cold cinder the quality of slag. Experimental study on the use of orthogonal excitation of this compound on slag - cinder early strength cement mortar compound the effects of X-ray diffraction, thermal analysis, methods such as scanning electron microscopy study after adding activating agent slag - cinder composite cement hydration process and microstructure analysis of the excitation mechanism. The results show that: The activating agent can not only improve the slag - cinder early strength cement compound, GGBFS,and the latter can the steady development of strength. when coal and other the quality of the proportion of slag to replace 25% do not reduce the slag - cement cinder 28d composite strength. add after the fine grinding of cement cinder variation of flow properties can be improved through the addition of superplasticizer.GGBFS
blast furnace slag (ggbs) is the smelting of pig
As the iron species and composition of raw materials and changes in the operation of process factors, the composition and nature of the slag are also different. In accordance with the varieties of pig iron smelting, blast furnace slag can be divided into cast iron slag, steel slag and special pig iron pig iron slag. Accordance with the chemical composition of blast furnace slag in the amount of alkaline oxides. Blast furnace slag slag can be divided into basic, neutral and acid slag slag.
0 条评论
Slag quality requirements
National Standards (GB/203-94) of the granulated blast furnace slag of the quality requirements are as follows:
1, granulated blast furnace slag mass coefficient K should not be less than 1.2; (enterprise internal control standards are not less than 1.6)
2, granulated blast furnace slag content of manganese compounds in order to MnO shall not exceed 4%, manganese alloy granulated blast furnace slag of MnO to allow the relaxation to 15%; sulfide content (in terms of sulfur) can not exceed 3%; fluoride content of (as fluorine dollars) shall not be greater than 2%;
3, granulated blast furnace slag loose capacity of not more than 1.2kg / L, maximum diameter of not more than 100mm, more than 10mm particle content (by weight) is not greater than 8%;
4, granulated blast furnace slag shall not be mixed with foreign inclusions, such as iron tip mud, without the massive quench slag, etc.;
5, slag without drying before the period of storage into the grains from the moment when liquid cooling is not appropriate for 3 months. ggbfs
Slag powder Quality Standard
National Standards (GB/T18045-2000) <used in cement and concrete in the granulated blast furnace slag powder "provides as follows:
1, granulated blast furnace slag powder (referred to as slag) Definitions; GB/T203 meet standard requirements of the granulated blast furnace slag by drying, grinding (or adding a small amount of gypsum grinding together) to achieve a considerable fineness, and in line with the corresponding activity index powder, slag grinding Tokimitsu Xu adding grinding aids, by adding the amount of not more than 1% of the quality of slag powder;
2, slag powder density of not less than 2.8g/cm3; than the surface area of not less than 350m2/kg; (corporate internal control standards: not less than 400m2/kg.)
3, slag powder is divided into three, S105, S95, S75, their corresponding activity index 7 days is not lower than 95%, 75% and 55%, 28 days is not less than 105%, 95% and 75%, mobile Ratio is less than 85%, 90% and 95%.
4, slag powder moisture content less than 1.0%. 5, sulfur trioxide is not greater than 4.0%.
6, ion is not more than 0.02%. 7, loss on ignition is not more than 3.0%.
Main features:
● reduce the slump loss ● ● greatly enhance the durability of concrete in concrete significantly enhance the role of
● Excellent ● Reinforced Concrete alkali-aggregate inhibitors, corrosion resistance ● improve the pumpability of concrete ● reduce the bleeding of concrete
0 条评论
Danish Great Belt
Danish Great Belt;
Marine environment is a concrete finds itself one of the most severe environmental conditions, concrete structures need to withstand high mechanical strength and man-made force requirements, structure, easy-to-failure, while the concrete structure used in this environment will be subjected to freezing, storms, and water and other natural factors, the role of concrete subjected to injury tends to shorten its durable life. The existing ordinary concrete structure in this environment, the mechanical performance and durability problems have become increasingly acute, and thus had to spend a huge cost to its annual maintenance, this problem caused widespread concern around the world engineering.
Danish Great Belt project was first proposed by service life of 100 years, that is ensure that their mechanical properties also provides reinforcement in a hundred years during the period shall not commence Shou rust. To this end, a large number of thematic studies carried out in advance to provide concrete strict technical standards, by providing for a certain amount of silica fume admixture (silica fume) and fly ash concrete to ensure a low permeability; gas and air bubbles by means of quality control assurance the frost resistance; through the silica fume admixture (silica fume) to ensure abrasion resistance (anti-ice red mill); by restricting the activity of aggregate content, alkali limit on the total amount of silica fume admixture (silica fume) and of fly ash to prevent the alkali-aggregate reaction; Sodium Sulfate - the use of sulphate resisting cement and silica fume admixture (silica fume) assurance; through the use of low-heat cement, micro silica fume admixture (silica fume) and fly ash to reduce hydration heat, pouring of concrete used on the internal temperature control of thermal stress cracks.
0 条评论
What is the micro-silica powder encryption technology?
Encrypted silica loading and unloading efficiency, reduce storage space and an area suitable for automatic production, on-site feeding no longer appears the phenomenon of fly ash, labor conditions and improving the environment.
The company offers micro-silica encryption device that can do business together! Depth of micro-silica powder can be encrypted to 750KG / m3, running simple and reliable. Daily processing silica fume up to 20 tons.
0 条评论
大凌河十年九旱
大凌河流域属温带季风气候,夏季多雨炎热、空气湿润,冬春少雨,气候干燥,是辽宁省干旱地区之一,有“十年九旱”之称。流域内多年平均降雨量为430—630毫米,降水量年际变化较大,年内分配极不均匀,多集中在7、8月份。多年平均蒸发量一般在1800—2300毫米。多年平均径流量为16.40亿立方米,最大年径流量为35.80亿立方米,最小年径流量3.40亿立方米,7—9月份径流量约占全年的60%。
白石水库在建设过程中,注意摆脱旧观念的束缚,尽可能采用国际国内先进技术和先进管理方式。对工程的总体布置做到科学规划,布局合理,功能综合化。在水库的基础设施建设方面既满足建设需要,又要适应今后长远发展的要求;在工程实施过程中,坚持按国际工程管理,增加科技含量,广泛采用新材料、新工艺、新技术。比如在施工技术上,对碾压混凝土采用RCD施工工法、RCC混凝土配合比。既保持了RCD混凝土良好层间结合和防渗性能的优点,同时兼有了RCC混凝土高掺粉煤灰、减少水泥用量、降低水化热的优点,从而发展了RCD工法。特别是泄洪排沙底孔全过程仿计算及抗冲材料的研究与应用。底孔全过程方针配筋设计和微硅粉(silica fume)混凝土抗冲磨材料在水利工程上应用达到国内领先水平。这在国际上也是一个重大突破。实践证明,在工程建设中坚持高起点,按现代化的标准,运用现代化的技术,实行现代化管理,是建设一个现代化工程的必要条件。
0 条评论
Silica fume in oilfield cementing the special-use
Silica fume in oilfield cementing the special-use
ZYT-S high-activity silica fume is a new type of concrete admixtures. This product is the main ingredient is si02, average particle size is 0.1μm, for the cement, 1%, the color was light gray to carbon black ranging from reaction with the ash properties, and the formation of silicon-rich gel hydration, the intensity is higher than calcium hydroxide crystals, with the cement hydration CSH gel work together, is a highly active water-rigid cementitious material, doped with it makes all the physical properties of concrete indicators improved significantly. Be highly active micro silica bridge, dam concrete, high abrasion resistance, high impact concrete, sprayed concrete admixtures such as an ideal.
In recent years, micro-silica fume also began to widely used in the major oil fields. Especially in oil field cementing, since the use of micro-silica powder, thereby increasing the anti-body mud-curing properties of high-temperature strength of a recession. In the high-temperature deep geothermal wells and thermal recovery wells have been widely used. The general usage of 8% -15%.
0 条评论
China's three years out of 600 million tons of cement shaft kiln
China's current 600 million tons capacity of the survival of a small shaft kiln cement has entered the countdown period. The reporter learned from relevant sources that the National Development and Reform Commission and the Public letter of intention by the Ministry of industry guidance, China's current 600 million tons of small vertical kiln cement production capacity from next year, 2012, with three years out of a cement market, this move will involve more than 3,000 domestic enterprises. This arrangement is the second National Development and Reform Commission released in 2007 after the phase-out plan, once again stepped up efforts to eliminate backward production capacity.
The nation's largest building materials companies Zhi-Ping Song, chairman of China Building Materials Group, the day before yesterday to participate in the "Fortune CEO Summit" to the CBN reporter confirmed the above statement and said that to speed up the pace out of small cement means that the cement industry will have more opportunities of mergers and reorganizations, change The disorderly competition in the market situation, so that the industry leading enterprises bigger and stronger possible. (microsilica)
1 条评论
Fu Chao-Highway
Ordinary concrete bridge deck pavement design thickness as thin (8Omm ~ 150mm) brittleness, in the driving process, in turn Rojo contained, the impact of fatigue loading, as well as factors such as temperature and humidity under the influence of deformation, easily leading to ordinary concrete bridge deck Pavement cracking, damage, waterproof malfunction. Polypropylene fiber concrete and silica fume can enhance the anti-fatigue, impact-resistant wear and crack resistance, crack resistance capacity, and improving toughness and impermeability, can effectively prevent the
Concrete expansion of the internal and surface cracks or delay the emergence of crack, which is used for bridge deck pavement of a kind of ideal material. Therefore, this deck surfacing of concrete materials design using polypropylene fiber reinforced concrete, while adding micro-silica powder to compensate for shrinkage, to extend the distance between deck seams further enhance the anti-cracking of concrete, seepage capacity
0 条评论
Cement is not the effect of admixture silica fume
0 条评论
